Board index Onkyo Europe Receivers wired and wireless simultaneously active on TX-8150

wired and wireless simultaneously active on TX-8150

Posts: 1
I cannot control the tuner through an app when it is connected to a LAN.

I just bought the tX-8150 to connect to a wired NAS audio server on wired lan.
Of course i want to control the tuner with an app on a smartphone, but the app works through wifi only (not bluetooth).
And on the Tune it appears the either LAN or WIFI has can be activated but not both.

This seems very odd for such an expensive tuner as the TX-8150.

Does anyone know how to solve this problem?

Posts: 816
Hi mv-quer,

yes you must choose that you connect the receiver wireless or wired.
The app, the receiver and the router must be in the same network then, to controll the receiver over the app.

Controll this please.
You can try an factory reset too.

While the unit is on, press and hold the TUNING MODE button and press the ON/STANDBY button. “Clear” is displayed on the display, the unit enters standby mode, and the unit is reset to the state it was in at the time of purchase.

Make the setup then again.

With best regards
Kind regards
Customer Care

Pioneer & Onkyo Europe GmbH
Geschäftsführer: Susumu Shiotsuka, Kenji Maeyama, Akihiro Takada
Handelsregister: Amtsgericht München, HRB 44995
UST-IdNr. (VAT No).: DE 128238893

Return to Receivers